Samsung MH020FPEA Service Manual page 49

Disassembly and Reassembly
No Parts
10) At first, press the left and center hook of
2 Electrical Parts
1) Take all the connector of PCB upper side
(Main PCB)
2) Detach the outdoor unit connection wire
3) If pulling the main PCB up, it will be taken
3 Tray Drain 1) Pull Tray Drain out from the Back Body.
4-2
Procedure
the back side of the Panel Grille with the
thumb to remove the hook. And press the
right of the upper side of the Panel Grille
with the fingers. And then disassemble
the Panel Grille.
out.(Including Power Cord)
from the Terminal Block.
out.
Remark
Samsung Electronics