Usb Play Operation - Boss Audio Systems BV7335B Owner's Manual

OPERATION
6) DIGITAL SETUP
When you open the DIGITAL menu,
you will see the following picture:
DIGITAL SETUP
OP MODE
DYNAMIC RANGE
DUAL MONO
* OP MODE: to set the operating
modes for Dolby Digital decoder,
there are LINE OUT and RF
REMOD to be selected.
* DYNAMIC RANGE: you can
adjust the dynamic range between
OFF, 1/8, 2/8. 3/8, 1/2, 5/8, 3/4,
7/8, full.
* DUAL MONO: there are STEREO,
MONO L, MONO R and MIX
MONO to be selected.
Note: The displayed setting information
is different according to different version.
◆ On-screen Display Function
Press the OSD button on the front
panel or on the remote control during
playback to display the console
information of the current disc on the
screen.
For an example (when playing a DVD
disc):
Once you press OSD button you will
see the information as the following
order.
1) Item: TT
Function: Display the current title
number and total title
number.
2) Item: CH
Function: Display the current chapter
number and total chapter number.
3) Item: (This icon only displayed
for several seconds, after several
seconds it will disappeared.)
Function: Display the played time of
the current chapter.
4) C-: Display the remaining time of the
current chapter.
5) T: Display the played time of the
current title.
6) T-: Display the remaining time of the
current title.
7) C: Display the played time of the
current chapter.
8)
Display the current disc's
LANGUAGE, AUDIO TYPE,
SUBTITLE LANGUAGE and PLAY
ANGLE.
Note: The displayed information is
different according to different type of
discs.
◆ Last Play Memory
1) During disc playback, if you turn off
the unit and then turn on the unit
again, the DVD unit will resume
playing from the point that just
interrupted.
2) During disc playback, if you press
MODE button to switch to other mode,
then return to DVD mode again, the
unit will resume playing from the point
that just interrupted.

USB PLAY OPERATION

On the front of the unit, when you open
the USB cover, you will see an USB
interface. An USB device can be
connected through this interface.
When you connect an USB device
through the interface, the unit will search
21