Dvd Operation - Boss Audio Systems BV7335B Owner's Manual

Mobile audio/video system
Hide thumbs Also See for BV7335B:
Table of Contents

Advertisement

OPERATION
displayed on the screen.
Pressing
MUT button on the front
panel or MUTE button on the remote
control will mute the sound. Press it
again will resume the sound.
Mode selection
Press MODE button on the front panel
or MODE on the remote control to
select the desired mode to enjoy.
Such as DVD, radio, USB, SD, AUX
mode.
Loudness
Press MON/LOU button on the front
panel shortly to switch loudness
function on, and "LOUD" will appear
on the LCD.
Press it shortly again to release this
function, and "LOUD" will disappear.
Clock set
Press CLOCK button shortly on the
front panel to display the clock. Then
press and hold CLOCK button for
several seconds, the hour will be
selected, then rotate the volume knob
on the front panel to change the value
and press volume button to confirm.
The cursor will resume to the minute.
Then use the volume knob on the
front panel to change the value of the
minute and press volume button to
confirm.
Equalization
In radio mode, press AUDIO button
on the remote control or EQ button on
the front panel to turn on equalization
function and to select desired audio
mode, such as POP, CLAS, ROCK
and OFF.
In DVD mode, press and hold the
button is EQ function.
Brake function
If the brake wire (pink wire) isn't
connected to the ground (when
driving), the picture will not be shown
on the screen in DVD/AUX mode for
safety purpose. Only the audio will be
heard.
Note: Only when parking, the
DVD/AUX picture can be seen on the
screen. When driving, the warning
information will be displayed.
Rearview function
On the back of the unit, there is a
yellow jack for rearview video in.
When backing a car, the picture of the
screen will switch to rearview picture
automatically and the unit will play the
video information that inputted from
the yellow rearview video in jack.

DVD OPERATION

Loading/ejecting a disc
When the front panel folding down,
you will see the disc slot and
(eject) button on the housing of the
unit.
When there is not any disc on the slot,
insert the disc with printed side facing
up into the disc slot. Then let the front
panel up to normal position. The
player will start playback
automatically.
Press
button to eject the disc.
Stopping playback
Press
button on the front panel or
on the remote control for one time
to pre-stop the playback. When
button on the front panel or on
the remote control is pressed, normal
playback will continue.
Press
or
the playback completely.
16
button twice to stop

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents