Usb Operation; On-Screen Display Function - Boss Audio Systems BV7980 User Manual

BASIC OPERATION

USB Operation

Following the diagram below, connect
your USB device to the front panel USB
port. If it is properly connected, the
device will be mounted and start
playing automatically.
In USB Playback mode
Use the UP, DOWN, RIGHT or LEFT
buttons to navigate to and select files
to play, and press ENTER to begin
playback (or viewing, in the case of
JPEG files). To skip to the next or
last track, press the
Press the or
Forward or Fast Reverse playback.
REPEAT play modes are also available
by repeatedly pushing
the desired mode is found.
Changing From USB to DISC Playback
Modes
If you are in USB Playback mode and
wish to begin playback of a disc already
in the player, press the STOP button
once. Then press the GOTO button
and the player will switch to DVD/VCD/
CD/MP3 Playback mode.
Changing From DISC to USB Playback
Modes
If the disc present in the player is an
MP3 disc, press the STOP button once
and press the GOTO button to USB
playback.
If the disc present in the player is an
DVD or VCD or CD disc, press the
STOP button twice and press the
GOTO button to USB playback.
Important Note:
TO PREVENT DAMAGE TO THE USB
DEVICE, DO NOT REMOVE OR
DISCONNECT IT DURING PLAYBACK.
It is also a good practice to remove
the USB drive during disc playback.
(USB connect line)
or buttons.
buttons for Fast
REPEAT until

On-Screen Display Function

Press the OSD button during Disc
Playback to display information about
the current disc. Pressing repeatedly
will show you different data, as shown
below. In this example, we are looking
at the contents of a DVD disc.
DVD example:
a. Press OSD once:
TITLE ELAPSED
TT 01/01 CH 01/38
b. Press OSD again:
TITLE REMAIN
TT 01/01 CH 01/38
c. Press OSD a third time:
CHAPTER ELAPSED
TT 01/01 CH 01/38
d.Press OSD a fourth time:
CHAPTER REMAIN
TT 01/01 CH 01/38
In the following example, we are looking
at the content information of a VCD,
SVCD or CD disc:
A.Press OSD once:
SINGLE ELAPSED
TRACK 01/16
b.Press OSD a second time:
SINGLE REMAIN
TRACK 01/16
c.Press OSD a third time:
TOTAL ELAPSED
TRACK 01/16
d.Press OSD a fourth time:
TOTAL REMAIN
TRACK 01/16
Pressing OSD for MP3 discs does not
display as much information. The
information simple switches back and
forth as follows:
SINGLE ELAPSED
17
0:02:06
3:24:36
0:02:56
0:04:32
00:49
02:45
00:60
78:46
SINGLE REMAIN