For Mac Os; 10.1/10.2.1 Or Greater - Brother Printer/Fax/Scanner/Copier MFC-8840 Quick Setup Manual

Step 2
For Network Interface Cable Users

For Mac OS

Make sure that you have completed the instructions from Step 1 "Setting Up
the Machine" on pages 2 - 8.
1
Make sure that the NC-9100h (Network
Print/Fax Server) is installed into the MFC.
(See Optional accessories in Chapter 23 of
the User's Guide.)
2
Switch off and unplug the MFC from the AC
outlet and disconnect it from your Macintosh
if you already connected an interface cable.
3
Turn on your Macintosh
4
Insert the supplied CD-ROM for Macintosh
into your CD-ROM drive.
5
Double-click the Start Here OSX folder to
install the printer driver and Remote Setup
program. If the language screen appears
select your language.
47
Installing the Driver & Software
®
X 10.1/10.2.1 or greater
®
.
6
Click Install next to the MFL-Pro Suite.
7
Select Network Interface, and then click
Install.
8
Connect the network interface cable to the
printer, and then connect it to a free port on
your hub.
®
9
Turn on the MFC by plugging in the power
cord. Turn the power switch on.
0
Select Applications from the Go menu.