Brother NC-2200W Network User's Manual page 28

The NC-2200w supports the Automatic Private IP Addressing
(APIPA) protocol. If a DHCP/BOOTP/RARP server is
unavailable, the NC-2200w will automatically assign an IP
address from the range 169.254.1.0 to 169.254.254.255.
We recommend that you contact your network administrator if
you are unsure about the correct IP address settings.
8
A list of the found Wireless Networks will be displayed. Select
the Access Point/Base Station you wish to associate the NC-
2200w with and click Next.
If the Access Point/Base Station doesn't appear on the list, you
can manually add it by clicking Add. Follow the on screen
instructions for entering the SSID/ESSID and Channel number.
The SSID/ESSID name "SETUP" may be displayed on the list
more than one time. You can select any "SETUP" from the list.
9
If your network is not configured for Authentication and
Encryption, the screen shown will appear. To continue
installation, click OK.
Go to Step 10.
NC-2200W WIRELESS SETTING 2 - 17