Step 2 :Specifying The Scan Destination Address Using The Nc-2200W Home Page - Brother NC-2200W Network User's Manual

STEP 2 :Specifying the Scan Destination Address using
the NC-2200W Home Page
You must use a web browser to configure this setting.
1
Open your Web browser and enter the following in the URL field.
http://NC-2200w_ip_address
Where NC-2200w_ip_address is the IP address or node name
of your NC-2200w.
For more information on the IP address and the login password
etc., see
settings
2
Go to the General Page under the Configurations.
(Available languages are English, German,
French, Dutch and Japanese.)
3
Enter the IP address or name of the target computer.
If the IP address was assigned automatically, you should
enter the computer name because the IP address may have
changed. This name can be Windows
name or a DNS host name.
5 - 5 NETWORK SCANNING FROM WINDOWS
Using the Embedded Web Server to change
on page 2-20.
®
(NetBIOS) computer
®