Table of Contents
Advertisement
Diagnostics
Chapter 6
The D
tests from the T3SU 300. Figure 6-1 shows the main D
menu. Tests can be performed for the entire DS3 or for an
individual DTE port. To choose a port from the left column of the
menu, select the port's corresponding number and press Enter .
The individual port menus provide loopback and BERT selections.
BERT configuration options and results are given in the right
column of the main D
described in the following sections.
You can only perform a BERT test on one port at a time. If a BERT test is
already in progress and a second BERT test is selected for another port,
the first test is discontinued.
Loopback tests may be performed simultaneously on all ports.
61200217L1-1
menu allows you to initiate loopback and BERT
IAGNOSTICS
IAGNOSTICS
T3SU 300 User Manual
menu. Diagnostic selections are
IAGNOSTICS
6-1
Advertisement
Table of Contents
