Assembling The Cleaner; Using The Cleaner - Pentair RACER LS Instruction Manual

Assembling the Cleaner

1. Attach the Quick Connect fitting on the end of the hose to the feed tube on the RACER
Cleaner. Be sure the snaps are engaged.
2. Attach the debris bag to the cleaner. Push the bag over vacuum tube to click it into place.
3. Review checklist before use:
• Hoses cut properly and floats evenly spaced.
• Mender nuts are tight on feed hose.
• Wall fitting secure and in place.
• Debris bag and hose assembly attached.
• Ensure debris seal is attached. See Figure 9.

Using the Cleaner

1. Lower the cleaner carefully into pool.
2. Switch ON the FILTER PUMP.
3. Wait at least 60 seconds to allow air to blow out of the hose.
4. Switch ON the BOOSTER PUMP.
Debris Bag
Lead Hose
Mender Nut
Quick Connect Fitting
(with built-in swivel)
Feed Tube
Sweep Hose
Assembling the Cleaner
Figure 9
Debris Seal
RACER ® LS Pressure Side Pool Cleaner Installation and User's Guide
® LS Pressure Side Pool
Feed Tube
Debris Seal
5