Adjusting Water Flow To The Cleaner - Pentair RACER LS Instruction Manual

8

Adjusting Water Flow to the Cleaner

Incorrect water flow to the RACER
can cause a variety of performance issues. To achieve proper
performance, the RACER LS cleaner must operate between
35 - 42 RPMs. See page 2, "Calculating Cleaner Speed/RPM" for
instructions on determining your cleaner's RPM.
Flow can be adjusted at the wall fitting using the wall fitting valve.
To adjust flow to the cleaner:
1. Using a flathead screwdriver, turn the valve clockwise (to reduce
flow) or counter-clockwise (to increase flow). See Figure 16.
RACER ® LS Pressure Side Pool Cleaner Installation and User's Guide
®
LS Pressure Side Pool Cleaner
Turn counterclockwise
to OPEN
Figure 16