Setting The Speaker Volume; Setting The Ring Volume; Memory Storage; Memory Security - Brother MFC-9870 Owner's Manual

Setting the Speaker Volume

You can set the volume of the MFC speaker.
1
Press Menu, 1, 0, 6.
2
Press or to select your volume setting (OFF, LOW, MED, or
HIGH).
3
Press Set when the screen displays your selection.
4
Press Stop to exit.

Setting the Ring Volume

You can select how loud, or if, the MFC rings.
1
Press Menu, 1, 0, 7.
2
Press or to select OFF, LOW, MED, or HIGH.
3
Press Set when the screen displays your selection.
4
Press Stop to exit.

Memory Storage

In the event of a power failure, all settings in the INITIAL SETUP,
SETUP RECEIVE, SET QUICK-DIAL, and REMOTE FAX OPT,
plus the COVERPG SETUP, COVERPAGE NOTE (from SETUP
SEND) and JOURNAL PERIOD (from PRINT REPORTS) functions
are stored permanently. You may have to reset the date and time.

Memory Security

This feature allows you to prevent unauthorised access to the fax
machine. When switched ON, Memory Security prohibits most
functions. The following functions listed are available while Memory
Security is switched ON.
Receiving faxes into memory [limited by Memory Capacity].
Scheduled Delayed Transmission*
Polling*
Fax Forwarding*
Remote Retrieval
* Provided it was set before Memory Security was switched ON.
I N I T I A L S E T U P
31