Setting The Print Density; Advanced Receiving Operations; Operation From Extension Telephone; Changing The Fax Receive Code - Brother MFC-9700 Owner's Manual

Setting the Print Density

You can adjust print density, making your printed pages darker or lighter than
the original.
1
Press Menu, 2, 1, 5.
2
Press to make print lighter, or
make print darker.
3
Press Stop/Exit .

Advanced Receiving Operations

Operation from Extension Telephone

If you answer a fax call on an extension phone (or on an external phone in the
EXT. jack), you can make your MFC take over by using the Fax Receive Code.
When you press the Fax Receive Code
(See
Easy Receive
If you answer a call at an extension or external phone, and no one is on the line,
assume you're receiving a fax. At an extension phone, press
receiving tones (chirps), then hang up. At an external phone, press
wait for the phone to be disconnected (the LCD shows RECEIVING) before
you hang up. (Your caller will have to press Fax Start to send the fax.)

Changing the Fax Receive Code

The preset Fax Receive Code (
systems.
If you are always disconnected when accessing your external TAD remotely, try
changing the Fax Receive Code from
1
Press Menu, 2, 1, 3.
2
Press
or
and then press Set.
3
If you want to, enter a new Fax Receive
Code, and then press Set.
4
Press Stop/Exit.
, page 5-3.)
5 1) may not work with some telephone
to select ON (or OFF),
to
5 1, the MFC starts to receive a fax.
5 1 to # # #.
S E T U P R E C E I V E
5 1, wait for fax
5 1 and
5 - 4