To Select Or Change Your Receive Mode; Setting Ring Delay - Brother MFC-9700 Owner's Manual

To Select or Change Your Receive Mode

1
Press Receive Mode. The LCD shows
your current selection.
2
Continue to press Receive Mode until your new selection appears. After two
seconds, the LCD returns to the date and time display, along with your new
Receive Mode setting.
If you are changing the Receive Mode while in another operation, the LCD
returns to that operation.
Current Receive Mode

Setting Ring Delay

The Ring Delay setting determines the number of times the MFC rings before it
answers. If you have extension phones on the same line as the MFC or are using
the telephone company's Distinctive Ring service, keep the Ring Delay default
setting of 4. You can try increasing the Ring Delay to 5 rings; however, if you
do not receive all your faxes, you must reset it to 4 rings.
1
Press Menu, 2, 1, 1.
2
Press
or
times the line rings before the MFC answers (00–05) , and then press Set. If you
select 00, the line doesn't ring at all.
3
Press Stop/Exit.
to select how many
S E T U P R E C E I V E
5 - 2