Installing Extra Memory - Brother MFC-9450CDN User Manual

Note
• There might be some SO-DIMMs that will
not work with the machine.
• For more information, call Brother
Customer Service.

Installing extra memory

a
Turn off the machine's power switch.
b
Disconnect the interface cable from the
machine, and then unplug the power
cord from the AC power outlet.
c
Remove the DIMM covers (1 and 2).
d
Unpack the DIMM and hold it by its
edges.
CAUTION
To prevent damage to the machine from
static electricity, DO NOT touch the
memory chips or the board surface.
e
B
f
2
1
g
h
To make sure that you have installed the
SO-DIMM properly, you can print the user
settings page that shows the current
memory size. (See User Settings
List on page 24.)
Hold the DIMM by the edges and align
the notches in the DIMM with the
protrusions in the slot. Insert the DIMM
diagonally (1), then tilt it toward the
interface board until it clicks into
place (2).
1
Put the DIMM covers (2 and 1) back on.
Plug the machine's power cord back into
the AC power outlet first, and then
connect the interface cable.
Turn on the machine's power switch.
Note
Option
2
2
1
B
63