Storing Numbers For Easy Dialling - Brother MFC-9030 Owner's Manual

Setting the Dialling Mode (Tone/Pulse)
The machine is initially set to TONE. If you are using a PULSE dial line, you can change the setting
to PULSE by following the steps below.
1
Press Menu/Set, 1, 9. The screen prompts you to select PULSE (or TONE).
2
Use or to select the dialling mode.
3
Press Menu/Set when the screen displays the dialling mode you want.
4
Press Stop/Exit.

Storing Numbers for Easy Dialling

You can set up the machine to do the following types of easy dialling: One Touch (FAX-8070P),
Speed Dial and Groups for Broadcasting of faxes.
Even if you lose electrical power, numbers stored in memory will not be lost.
Storing One Touch Dial Numbers (For FAX-8070P Only)
You can store 8 fax/phone numbers that you can dial by pressing one key. You can also store names
with these numbers. When you press a One Touch key, the screen displays the name or number as
the call is dialled. (See One Touch Dialling (For FAX-8070P Only), page 23.)
One Touch Dial keys are not the dial pad keys. They are the 4 keys (numbers
1-8). One Touch Dial Numbers 5-8 are accessed by holding down Shift while you
press the appropriate One Touch Dial key.
1
Press Menu/Set, 2, 3, 1.
2
Press the One Touch Dial key where you want to store a number. The screen displays the
location you selected.
3
Enter a number (up to 20 digits), and press Menu/Set. The screen prompts you to enter a name
for this number.
4
Use the dial pad to enter the name (up to 15 characters). (See Entering Text, page 147.)—OR—
Go to Step 5 to store the number without a name.
5
Press Menu/Set. Return to Step 2 to store another One Touch dial number—OR—Press
Stop/Exit.
When you dial a One Touch dial number, the screen displays the name you have stored or if you have
not stored a name, the number you have stored.
21
Setup