Bose Wave radio Owner's Manual page 7

Figure 5
RCA cable from one com-
ponent plugging into INPUT
jacks on the pedestal for
the (a) Wave ® radio/CD and
(b) Wave ® radio
One at a time
For each separate component you add, there is a simple two-step process:
1. Connect the ends of one RCA cable:
• to the audio output of the component you will use with the radio, and
• to one of the three pairs of INPUT jacks on the pedestal (Figure 5).
When inserting the connectors, be sure to connect red-to-red and white-to-white
at each end. This ensures consistent right and left channel connections for proper
performance.
(a)
Red RCA
connector
Component
RCA cable
White RCA
connector
Component
RCA cable
(b)
Red RCA
connector
INPU T
White RCA
connector
Setting Up
®
®
7