Bose Wave radio Owner's Manual page 5

Figure 2
How the (a) Wave ® radio/
CD or (b) Wave ® radio con-
nects to its pedestal
Figure 3
How the Wave ® radio/CD
radio slips into the pedestal
(Wave ® radio not shown)
Connect your Wave
Before you seat the radio in the pedestal:
1. Make the RCA jack connections, as shown in Figure 2a for the Wave
the Wave ® radio.
• Insert the white cable connector from the pedestal into the white AUX IN jack labeled L
on the back of the radio.
• Insert the red cable connector from the pedestal into the red AUX IN jack marked R on
the back of the radio.
2. Push the radio power plug through the cut-out in the pedestal so it can reach a wall outlet
or one of the three AC outlets on the rear of the pedestal.
3. Plug the radio into an outlet.
(a)
®
Wave radio/CD
power plug
Cut-out for
the radio plug
White RCA connector
Seat your radio in the pedestal
Next, place the radio flat in the open platform of the pedestal (Figure 3). You can feel when it
is properly seated.
WARNING: Do not plug in the pedestal power plug until all other connections are completed.
®
radio to its pedestal
Red RCA connector
®
Wave radio/CD
power plug
®
®
White RCA connector
Red RCA connector
(b)
INPUT
Setting Up
radio/CD, or 2b for
®
Cut-out for
the radio plug
5