This Guide; The Dabwifi6 Must Be Setup To Fit The Bang & Olufsen System - OneRemote DabWiFi6 Setup Manual

THIS GUIDE

This guide covers the connection of the DabWiFi6 tuner to a Bang & Olufsen system.
Check the User Guide for the DabWiFi6 tuner for the daily control with a Bang & Olufsen remote.
THE DABWIFI6 MUST BE SETUP TO FIT THE BANG & OLUFSEN SYSTEM
When the DabWiFi6 tuner's location in the Bang & Olufsen system has been established it needs
to be programmed to fit that location. It shall be programmed with an Option.
The DabWiFi6 tuner is factory programmed with the Source Option 102 making it possible to
switch DabWiFi6 on and controlling it by pressing y or b on a Bang & Olufsen remote.
If the Bang & Olufsen system has a vacant input socket that is activated by pressing y or
b, all it takes is connecting the DabWiFi6 tuner to this socket, completing the installation
that way.
If the Bang & Olufsen system is without a vacant input socket activated by selecting y or
b, another vacant input must be found, and the corresponding option added to the
DabWiFi6 tuner.
The DabWiFi6 tuner must know its place in the B&O system, to be able to synchronize with it.
4
www.oneremote.dk