Volume; Installation - OneRemote DabWiFi6 Setup Manual

VOLUME

The volume level is PRIMARILY controlled via the B&O device with speakers connected, using the
ordinary volume control keys on the B&O remote.
Thus, the DabWiFi6's volume out level should normally be set at the maximum level.
Note that the volume level may be altered in three different ways using:
1. The B&O remote's volume keys, controlling the B&O device that the DabWiFi6 is
connected to.
2. The button on the front of DabWiFi6.
3. A smartphone/ tablet APP that controls the DabWiFi6 via a WiFi connection.

INSTALLATION

Connection to Bang & Olufsen Devices
The OneRemote DabWiFi6 tuner connects to any Bang & Olufsen device with a vacant audio input
socket like on a BeoSound, BeoCenter, BeoMaster or a BeoVision TV and is controlled with a Bang
& Olufsen remote. DabWiFi6 may also be connected to equipment of all other brands, but it can
only be controlled with a Bang & Olufsen remote.
Through the years peripheral inputs have been added, removed or renamed on Bang & Olufsen
equipment. For example, the selection with newer Bang & Olufsen remotes $ has replaced
former hy or K.
In the chapter Bang & Olufsen Equipment and OneRemote Options inputs, designations and the
corresponding opening sources are listed for various Bang & Olufsen units. Thus, it is possible for
all Bang & Olufsen units listed to select an input, its designation and the opening source
corresponding to a DabWiFi6 tuner option and the remote command enabling control of the
tuner.
DabWiFi6 is delivered with a 7-pin DataLink and RCA cable, thus the DabWiFi6 may be connected
to Bang & Olufsen radios from 1986 till now.
www.oneremote.dk
6