Printed Circuit Board (Pcb) Shield - Compaq TFT500 Maintenance & Service Manual

1.5.7 Printed Circuit Board Shield
1. Remove the seven screws from the printed circuit board (PCB) shield (spare part no. 296477-
001).
2. Carefully peel off the conductive tape located in several positions around the shield.
3. Remove the PCB shield.
Figure 1-12. Removing the PCB shield
When reinstalling the PCB shield, be sure to reapply the conductive tape in the correct
positions.
Compaq TFT500 Flat Panel Monitor 1-13