2.6
Short-term individual settings
Caution!
2.6.1
Short-term increase/decrease of actual room temperature
Note
2.6.2
Short-term change of temperature level
Siemens Building Technologies
Landis & Stefa Division
These changes are valid only up to the next switching point.
By pressing these buttons, you increase or decrease the actual room tem-
perature in increments of 0.2 °C by a maximum of ±4 °C. The display first
°C
shows the newly selected temperature and then the actual value again.
If, as a result of the factory settings, you always feel either too warm or too cold, you
should readjust the temperatures
of end-user settings) to suit your needs.
When pressing this button, you change from the current temperature level
to the other. The display shows either
from the economy temperature, or
temperature. This means you can select the economy temperature during
the time you are absent.
Basic Documentation REA22
Handling
or
on the settings level (see chapter "Description
, when the change was made
, when it was made from the normal
Issue 2.0
CE1P2276E / 31.03.1999
13/30