Holiday Program - Siemens REA22 Basic Documentation

3.4

Holiday program

Note
Siemens Building Technologies
Landis & Stefa Division
You can enter the start and the duration of your holiday period. In that case, the controller
switches to economy mode at the beginning of the holiday period and back to the selected
operating mode when the holiday period has expired.
symbol , the number of remaining days (e.g. 14) in the holiday period as follows:
1 2 3 4 5
0 6 12 18
To make settings, proceed as follows:
Move the setting slider to the holiday symbol
1
Day 6
1
Auto
Move the setting slider back to this position and close the cover. If you re-
turn from your holidays earlier than expected, you have to reset the holiday
Run
period to
On completion of the holiday period, the controller will resume the selected operating
Auto 1...7
mode (e.g. ).
Basic Documentation REA22
Description of end-user settings
6 7
24
- 5
Press this button to set the start of the holiday period (max. 6
- 7
... 7
days in advance; 1 = Monday...7 = Sunday).
Press the arrow buttons to enter the duration of the holiday
period (1...99 days).
.
Issue 2.0
The display shows, with the holiday
.
CE1P2276E / 31.03.1999
19/30