Page 1
TM-H1750CG All manuals and user guides at all-guides.com OPERATING INSTRUCTIONS [ TM-H1750CG / TM-H1750CG COLOR VIDEO MONITOR BEDIENUNGSANLEITUNG : FARB-VIDEO-MONITOR MANUEL D’INSTRUCTIONS : MONITEUR VIDEO COULEUR MANUALE DI ISTRUZIONI : MONITOR VIDEO A COLORI INSTRUCCIONES : MONITOR DE VIDEO A COLOR !"#$%&'(&)
CAUTION: Changes or modification not approved by JVC could void the user's authority to operate the WARNINGS equipment. To prevent fire or shock hazard, do not expose this...
POWER SCAN CHECK ASPECT SLOT PHASE BRIGHT TM-H1750CG INPUT SELECT AUDIO A AUDIO B Tally lamp Blue Check button [BLUE CHECK] Lights when the tally control signal is ON. The tally control Cuts red and green signal components. Only blue signal...
Page 4
All manuals and user guides at all-guides.com CONTROLS AND FEATURES CONTROLS AND FEATURES (cont’d) (INPUT CARD: OPTIONAL) REAR VIEW COMPONENT/RGB INPUT CARD (OPTIONAL: <Rear Panel> IF-C01COMG) Video input/output terminals Input (IN) and output (OUT) terminals for component (color deference) or RGB signals. The IN and OUT terminals are bridge-connected.
ON (in the normal operation mode). OFF : Power turns OFF. (Power indicator: unlit) Orange : The main power is ON, but the monitor’s Rear side of the TM-H1750CG power is OFF (in the standby mode) color video monitor Unlit : The main power is OFF.
All manuals and user guides at all-guides.com HOW TO HANDLE BASIC HOW TO USE THE MENU FUNCTIONS OPERATIONS (cont’d) DISPLAY AND SELECTION IN THE <MENU> SCREEN MODE (SETTING) VIDEO SIGNAL CONTROLS You can set the following menu items. <MENU> screen Use these buttons for video signal control.
Page 7
All manuals and user guides at all-guides.com HOW TO USE THE MENU FUNCTIONS (cont’d) DISPLAY AND SELECTIONS IN THE <SET-UP Set-up menu items Purpose Settings PICTURE SUB ADJ. Image sub adjustment Selects CONTRAST/BRIGHT/CHROMA/PHASE. The MENU> MODE (SETTING) selected setting screen is shown. Select the function display for adjustment.
All manuals and user guides at all-guides.com HOW TO INITIALIZE THE BASIC CONNECTION EXAMPLE SETTING Notes: • Before connecting your system, make sure that all units are turned off. SCREEN DISPLAY AND SELECTIONS IN THE • The illustration below shows some examples of different connections. Terminal connections may differ depending on the component connected. Be sure to refer to the instructions provided with the unit(s) you are connecting.
All manuals and user guides at all-guides.com HOW TO USE EXTERNAL BASIC CONNECTION EXAMPLE CONTROL (cont’d) ABOUT EXTERNAL CONTROL VIDEO B (Y/C) Connection Example (Select Input B (Y/C)) This monitor is provided with an external control terminal. MAKE (make contact) or TRG. (trigger) system can be selected. (MAKE (make contact system): The function is controlled with H and L (short-circuit/open with the 15th pin GND).
TROUBLESHOOTING Solutions to common problems related to your monitor are described here. If none of the solutions presented here solves the problem, unplug the monitor and consult a JVC-authorized dealer or service center for assistance. Problems Points to be checked Measures (Remedy) No power supply.
TM-H1750CG All manuals and user guides at all-guides.com SPECIFICATIONS Type : Color video monitor Audio power output : 1 W (monaural) Color system : PAL, NTSC (3.58) Built-in speaker : 8 cm round x 1 impedance of 8 Ω Picture tube : 16-3/16"...
TM-H1750CG All manuals and user guides at all-guides.com Dimensions Unit : inch (mm) < Front View > < Side View > 16-1/2 (418.1) 16-1/8 (407) 15-5/8 (395) 1/16 (1.5) 12-7/8 (327.5) UNDER COLOR BLUE POWER CHROMA CONTRAST VOLUME/SELECT MENU ASPECT...