Testing And Intended Use; Introduction; Product Description - U-Line UCFZ527-SS31A User Manual

1.1 TESTING AND INTENDED USE

This equipment is tested in compliance with established regulations and then shipped ready for
use.
"If the equipment is used in a manner not specified by the manufacturer, the protection
1.2

INTRODUCTION

This manual provides all instructions required for the correct use of the equipment and to keep it
in optimal condition. It also contains important user safety information. The following professional
roles are explained in order to define individual responsibilities:
Installer: a qualified technician who installs the equipment in accordance with these instructions.
User: the person who, after having read this manual carefully, uses the equipment in
accordance with the intended specification of use described in this manual. User's
responsibilities: ensure that the product is kept at suitable temperatures in an ambient
environment less than +40°C (104°F); be aware of the regulations governing the conservation of
products to refrigerate and to observe any whatsoever hygiene indications that may be
applicable. The user is obliged to carefully read the manual and refer to its information at all
times. Particular attention must be paid to safety warnings (refer to Section 1.5).
Routine maintenance technician: qualified operator able to perform routine maintenance of
the equipment by following the instructions in this manual.
Service engineer: qualified technician, authorized by the manufacturer to perform
extraordinary maintenance of the equipment.
The symbol appears at certain points in the manual to draw the reader's attention to
important safety information.
The manufacturer declines any responsibility in case of improper use of the equipment
deviating from the reasonably construed intended use, and for all operations carried out that
are not in compliance with the instructions reported in the manual.
This manual must be stored in an accessible and known place for all operators (installer,
user, routine maintenance technician, service engineer).

1.3 PRODUCT DESCRIPTION

The equipment comprises a single body with paneling in various materials and insulation with
expanded polyurethane foam. The equipment instruments are located on the front panel where the
electrical wiring is housed. The motor unit and the evaporator unit are housed on the top of body.
The interior parts are fitted with suitable supports for shelves. The doors are fitted with an
automatic return device and magnetic seal elements. During the design and construction stage all
measures have been adopted to implement total safety including radius interior corners, funnel-
shaped base panel to convey condensate to exterior, no rough surfaces, fixed guards protecting
moving or potentially dangerous parts.
provided by the equipment may be impaired."
7
Use and Operational Manual
OPERATION
7