Printing Photos From A Digital Camera (Mfc-9320Cw Only); Before Using Pictbridge; Pictbridge Requirements; Using Pictbridge - Brother MFC MFC-9120CN User Manual

Printing photos from a digital
13
camera (MFC-9320CW only)
Your Brother machine supports the
PictBridge standard, allowing you to connect
to and print photos directly from any
PictBridge compatible digital camera.
Even if your camera is not in PictBridge mode
or does not support PictBridge, you can
connect your camera as a normal storage
device. This enables you to print photos from
your camera. Follow the steps for "Printing
data from a USB Flash memory drive
(MFC-9320CW only) on page 99".
Before using
PictBridge

PictBridge requirements

To avoid errors, remember the following
points:
The machine and the digital camera must
be connected using a suitable USB cable.
The image file must be taken with the
digital camera you want to connect to the
machine.
94

Using PictBridge

Setting your digital camera

Make sure your camera is in PictBridge
mode. The following PictBridge settings may
be available from the LCD of your PictBridge
compatible camera. Depending on your
camera some of these settings may not be
available.
Copies
Qualities
Paper size
Date print
File name print
Layout (1 in 1 printing/Index printing only)
Note
The names and availability of each setting
13
depends on the specification of your
camera.
13
You can also set the following PictBridge
settings by using the control panel.
Menu selections
Paper Size
Orientation
Date & Time
File Name
Print Quality
1
If you choose the paper size Letter, A4 or B5, Portrait
will be chosen. If you choose A5, B6 or A6,
Landscape will be chosen.
Options
Letter, A4, B5, A5, B6, A6
1
Portrait, Landscape
Off, On
Off, On
Normal, Fine
13
13
13