ADTRAN T200 H4TU-R Installation And Maintenance Practice page 12

Abbreviations used in the
are defined in
Performance Data Definitions
(Figure 14 and Figure 15).
Circuit ID:
H4TUC, H4TUR, and H4R LOOP Related:
ES-L Errored Seconds
SES-L Severely Errored Seconds
UAS-L Unavailable Seconds
DS1 and DSX-1 Line Related:
ES-L Errored Seconds
SES-L Severely Errored Seconds
LOSS-L Loss of Signal Seconds
PDVS-L Pulse Density Violation Secs
B8ZS-L B8ZS Seconds
CV-L Code Violation Count
NOTE: Reverse video indicates invalid data due to a terminal restart (or power
cycle), a data register reset, or a system date or time change.
N. Next
P. Previous
Circuit ID:
DS1 and DSX-1 Path Related:
ES-P Errored Seconds
SES-P Severely Errored Seconds
UAS-P Unavailable Seconds
SAS-P SEF/AIS Seconds
ES-PFE Far End Errored Seconds
CV-P Code Violation Count
NOTE: Under a UAS-P condition, ES-P and SES-P counts are inhibited.
Under a SES-L or SES-P condition, the respective CV-L or CV-P count is
inhibited.
P. Previous
12
screens
Performance History
screens
Performance Data Definitions
Selection:
Figure 14. Performance Data Definitions
Performance Data Definitions
Selection:
Figure 15. Performance Data Definitions (Continued)
Issue 1, December 2003
Line related definitions are shown in
Path related definitions are provided in
HDSL4 Framing
CRC>=1 or LOSW>=1
CRC>=50 or LOSW>=1
>10 cont. SES-Ls
Superframe and Extended Superframe
(BPV+EXZ)>=1 or LOS>= 1
(BPV+EXZ)>=1544 or LOS>=1
LOS>= 1
EXZ>=1; >7 zeros if B8ZS, >15 if AMI
B8ZS coded signal received
(BPV+EXZ) count
Superframe Extended Superframe
FE>=1 or
SEF>=1 or AIS>=1
FE>=8 or
SEF>=1 or AIS>=1
>10 cont. SES-Ps
SEF>=1 or AIS>=1
n/a
FE count
Figure 14
Figure
10/01/03 09:29:45
10/01/03 09:29:45
CRC>=1 or
SEF>=1 or AIS>=1
CRC>=320 or
SEF>=1 or AIS>=1
>10 cont. SES-Ps
SEF>=1 or AIS>=1
PRM bits G1-G6,SE,
or SL=1, or RAI
CRC error count
61223424L2-5A
while
15.