Menu Settings Installer Settings (For Installers Only); Installer Settings Menu Summary And Settings; System Configuration - Bosch FB 100 Installation And Operating Instructions Manual

32 | Menu settings INSTALLER SETTINGS (for installers only)

8 Menu settings INSTALLER SETTINGS (for installers
only)
The INSTALLER SETTINGS menu is
intended only for installers.
To open INSTALLER SETTINGS:
B
press and hold
3 seconds.
Moving through menu structure, programming,
deleting values and reverting to the default
setting are described in detail in section 5.2
starting on page 18.
8.1 INSTALLER SETTINGS menu
summary and settings
The tables set out below provide
an overview of the menu structure (column 1).
•
an overview of the factory settings (column 2),
•
e.g. for the purposes of resetting individual
menu options to the factory settings.
an overview of the adjustment ranges of the
•
individual menu options (column 3).
space for making a note of your personal
•
settings (column 4).
8.1.1 INSTALLER SETTINGS: System configuration
Menu structure

System configuration

Start automatic system
configuration
ID heating circuit
Heating circuit configuration
ISM
6 720 643 259 (2010/05)
menu
for approx.
Default
setting Control range
No No | Yes
0 1 ... 10
Unmixed No | Unmixed without IPM |
without IPM Unmixed with IPM | Mixed
No No | Present
references to the detailed descriptions of the
•
individual menu options (column 5).
The menu options are only shown if
the system components are present
and/or active. Some menu options
are not shown because they are
switched off by a setting for another
menu option.
B Always set or skip menu options
in order. In that way, subsequent
menu options will be
automatically adjusted or not
shown.
US/CA
Personal Description
setting starts on page
35