Table of Contents
Advertisement
4.2
Reset to factory settings
▶ Using the < or > keys, navigate to the Overview menu.
Overview
Tuesday, 10.08.21
14:50
20°
▶ Press the
key.
▶ Use the / key to navigate to Factory reset and select with
OK.
▶ To confirm the safety query: press the OK key and
simultaneously for 3 seconds.
The remote control is reset to factory settings and must
then be connected and configured again with the heating
system.
5
System handover
▶ Explain to the customer how the user interface works and
how to operate it.
▶ Inform the customer about the selected settings.
We recommend passing these installation manual on to the
customer.
6
Shutdown / switching off
The user interface is powered via the BUS interface and is
always switched on. The system should only be switched off for
maintenance work, for example.
▶ Disconnect power from the entire system and all BUS
nodes.
After a prolonged power failure or extended period of idleness,
the date and time may need to be reset. All other settings are
retained permanently.
RT 800 – 6721838942 (2023/01)
60%
0010041090-002
key
7
Environmental protection and disposal
Environmental protection is a fundamental corporate strategy
of the Bosch Group.
The quality of our products, their economy and environmental
safety are all of equal importance to us and all environmental
protection legislation and regulations are strictly observed.
We use the best possible technology and materials for
protecting the environment taking account of economic
considerations.
Packaging
Where packaging is concerned, we participate in country-
specific recycling processes that ensure optimum recycling.
All of our packaging materials are environmentally compatible
and can be recycled.
Used appliances
Used appliances contain valuable materials that can be
recycled.
The various assemblies can be easily dismantled. Synthetic
materials are marked accordingly. Assemblies can therefore be
sorted by composition and passed on for recycling or disposal.
Old electrical and electronic appliances
This symbol means that the product must not be
disposed of with other waste, and instead must be
taken to the waste collection points for treatment,
collection, recycling and disposal.
The symbol is valid in countries where waste
electrical and electronic equipment regulations apply, e.g.
"(UK) Waste Electrical and Electronic Equipment Regulations
2013 (as amended)". These regulations define the framework
for the return and recycling of old electronic appliances that
apply in each country.
As electronic devices may contain hazardous substances, it
needs to be recycled responsibly in order to minimize any
potential harm to the environment and human health.
Furthermore, recycling of electronic scrap helps preserve
natural resources.
For additional information on the environmentally compatible
disposal of old electrical and electronic appliances, please
contact the relevant local authorities, your household waste
disposal service or the retailer where you purchased the
product.
You can find more information here:
www.weee.bosch-thermotechnology.com/
System handover
7
Advertisement
Table of Contents
