Table of Contents
Advertisement
Step 4 If the corresponding file is found, the window indicating successful installation will be
displayed, as shown in the following figure.
Step 5 The USB port (COM15) is shown in the Device Manager window.
5.3.3 Programming Using the QPST Software
If the QPST software has been installed, run the eMMC Software Download tool and do as
follows:
Step 1 Ensure that you select Program Boot Loaders and Program MMC device.
2012-07-20
S7-PRO Maintenance Manual (Basic Version V2.1)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
INTERNAL
Page 19 of 97
Advertisement
Table of Contents
Troubleshooting
