Fujitsu PRIMERGY TX300 S4 Notes On Using page 4

Chapter 7 "7.2 BIOS Setup Utility" (Page 194 - 195)
Addition
The following submenu is added between "7.2.14 Memory Status Submenu" and "7.2.15 Console
Redirection Submenu".
PCI Status Submenu
This submenu appears when you select [PCI Status] at the [Server] menu.
Use this submenu to set whether or not to allow the use of the loaded expansion cards.
Item
Slot 1
Slot 2
Slot 3
Slot 4
Slot 5
Slot 6
Slot 7
4．Correction of "PRIMERGY TX300 S4 Contents List"(CA92276-8048-01)
Attachment items:
Deletion
The following item is deleted from the list.
Tag Label
Table: PCI Status submenu
Setting
OK(Unchangeable)
All Rights Reserved, Copyright© FUJITSU LIMITED 2008
4 / 4
Description
Sets whether to allow the use of
the expansion cards on PCI slots
1 to 7. If [Failed] is displayed,
replace the expansion card and
change the setting to [OK].