Setting The Ring Volume; Setting The Beeper Volume; Setting The Speaker Volume - Brother FAX 2820 User Manual

Setting the Ring Volume

You can turn the ring Off or you can select
the ring volume level.
1
Press Menu/Set, 1, 4, 1.
1.Ring
2
Press ▲ or ▼ to select Low , Med , High
or Off .
Press Menu/Set.
3
Press Stop/Exit.
—OR—
You can adjust the ring volume when your
machine is idle (not being used).
In mode (Fax), press
adjust the volume level. Every time you press
these keys, the machine will ring so you can
hear the active setting as the LCD shows it.
The volume changes with each key press.
The new setting will stay until you change it
again.

Setting the Beeper Volume

You can change the beeper volume. The
default setting is Med . When the beeper is on,
the machine will beep when you press a key,
make a mistake, or after you sent or received
a fax.
1
2
3

Setting the Speaker Volume

or to
You can adjust the machine's one-way
speaker volume.
1
2
3
—OR—
In Fax mode
speaker volume by pressing Hook/Hold, and
then selecting a speaker volume level.
Press
level. The LCD shows the setting you are
choosing. Each key press changes the
volume to the next level. The new setting will
remain until you change it again.
Press Menu/Set, 1, 4, 2.
2.Beeper
Press ▲ or ▼ to select Low , Med , High
or Off .
Press Menu/Set.
Press Stop/Exit.
Press Menu/Set, 1, 4, 3.
3.Speaker
Press ▲ or ▼ to select Low , Med , High
or Off .
Press Menu/Set.
Press Stop/Exit.
, you can adjust the
or to adjust the volume
Getting started
2
2 - 5