Setting The Station Id - Brother FAX 2820 User Manual

Chapter 2

Setting the Station ID

You should store your name or company
name and fax number so they print on all fax
pages you send.
1
Press Menu/Set, 0, 3.
3.Station ID
2
Enter your fax number (up to 20 digits).
Press Menu/Set.
3
Enter your telephone number (up to 20
digits).
Press Menu/Set.
(If the telephone number and fax
number are the same, enter the same
number again.)
2 - 2
Note
■
You cannot enter a hyphen in the number.
To enter a space press
numbers.
■
The telephone number you enter is only
used for Cover Page features.
(See Composing the electronic Cover
Page on page 3-9.)
4
Use the dial pad to enter your name (up
to 20 characters).
(See Entering Text on page B-11).
Press Menu/Set.
5
Press Stop/Exit.
Note
If the Station ID has already been
programmed, the LCD will ask you to press 1
to make a change or 2 to exit without
changing.
NOTICE (For USA)
The Telephone Consumer Protection Act of
1991 makes it unlawful for any person to
use a computer or electronic device to send
any message via a telephone fax machine
unless such messages clearly contain, in a
margin at the top or bottom of each
transmitted page, or on the first page of the
transmission, the date and time it is sent
and an identification of the business or
other entity or other individual sending the
message and the telephone number of the
sending machine or such business, other
entity or individual.
To program this information into your
machine, see Setting the Date and Time on
page 2-1 and Setting the Station ID on page
2-2.
once between