Scanning Difficulties; Software Difficulties - Brother DCP-8065DN User Manual

Printing Difficulties (Continued)
Difficulties
The machine prints unexpectedly
or it prints garbage.
The machine prints the first couple
of pages correctly, then some
pages have text missing.
The machine cannot print full
pages of a document.
Out of Memory message
appears.
The headers or footers appear
when the document displays on the
screen but they do not show up
when it is printed.
The machine does not print on both
sides of the paper even though the
printer driver setting is Duplex.
(DCP-8065DN only)
The machine is not printing or has
stopped printing and the machine's
status LED is yellow.

Scanning Difficulties

Difficulties
TWAIN errors appear while
scanning.

Software Difficulties

Difficulties
Cannot install software or print.
Cannot perform '2 in 1' or '4 in 1'
printing.
The machine does not print from
Adobe Illustrator.
When using ATM fonts, some
characters are missing or wrong
characters are printed in their
place.
52
Suggestions
Turn off the machine's power switch and then turn it on again. If the error
message continues leave the machine for several minutes and then try it
again.
Check the settings in your application to make sure it is set up to work with
your machine.
If you are using the parallel port connection, check that the port is BRMFC and
not LPT1.
Check the settings in your application to make sure that it is set up to work with
your machine.
Your computer is not recognizing the machine's input buffer's full signal. Make
sure that you connected the interface cable correctly. (See the Quick Setup
Guide.)
Reduce the printing resolution. (See Advanced tab in the Software User's
Guide on the CD-ROM.)
Reduce the complexity of your document and try again. Reduce the graphic
quality or the number of font sizes within your application.
Add more memory. See Installing extra memory on page 50.
There is an unprintable area on the top and bottom of the page. Adjust the top and
bottom margins in your document to allow for this.
Check the paper size setting in the printer driver. You need to select either A4,
Letter, Legal or Folio.
Press Job Cancel. As the machine cancels the job and clears it from the memory
it may produce an incomplete printout. Try to print again.
Suggestions
Make sure that the Brother TWAIN driver is chosen as the primary source. In
®
PaperPort , click File, Scan and choose the Brother TWAIN driver.
Suggestions
Run the Repair MFL-Pro Suite program on the CD-ROM. This program will repair
and reinstall the software.
Check that the paper size setting in the application and in the printer driver are the
same.
Try to reduce the print resolution. (See Advanced tab in the Software User's Guide
on the CD-ROM.)
®
If you are using Windows 98/98SE/Me, click Start, Settings, and then Printers.
Right-click Brother DCP-XXXX (where XXXX is your model name) and click
Properties. Click Spool Setting on the Details tab. Choose RAW from Spool
Data Format.