NEM-4
RF Troubleshooting
MJS-80 Module Jig
The MJS-80 Module Jig is used for testing of the following modules:
•
User Interface
•
Baseband and RF on system module
Product Code
MJS-80 Module Jig:
View of MJS-80
*Note:
Page 6(b)-4
Company Confidential
Figure 2: MJS-80
The nominal supply voltage for MJS-80 is +6.0 V.
The supply voltage must not exceed +12.0 V (min 5V).
(MJS-80 has overvoltage protection)
For flashing with FPS-8 it is possible to bypass regulator (jumper).
Copyright 2003 Nokia Corporation.
Company Confidential
CCS Technical Documentation
0770566
Issue 1 09/2003