Lrk-2 / 3 Lga Component Rework Kits 1 & 2 - Nokia NEM-4 Series Service Tools

CCS Technical Documentation
LRK-2 / 3 LGA component rework kits 1 & 2
Type designator
LRK-2 (0273645) Kit 1
MJS-76
SES-2
SPS-2
LRK-3 (0273646) Kit 2
SES-2
SPS-2
Rework procedure
Due to the large mechanical tolerance of the power amplifiers the following procedure is
necessary:
1 Put power amplifier into the MJS-76 re-work jig, the PA should be placed in the
best fit location, this is determined by firstly placing it in the largest location if
this is to large re-position the pa in the next size location, this should be carried
out until the best fit location is found.
2
Issue 1 09/2003
Company Confidential
Table 1:
Description Part code
LGA Re-work Jig 0770417
Stencil 0770415
Spreader 0770471
Stencil 0770415
Spreader 0770471
4
Copyright  2003 Nokia Corporation
Company Confidential
NEM-4
3
1
Page 1-7