Module Jig - Nokia NHL-10 Service Tools

CCS Technical Documentation
MJ-2 Module Jig
The MJ-2 Module Jig is used for testing the following modules:
• User interface
• Baseband and RF on system module
Product Code
MJ-2 Module Jig: 0770501
View of MJ-2
Note:
The nominal supply voltage for MJ-2 is +6.0 V .
The supply voltage must not exceed +12.0 V (min. 5.0 V).
Supply jig only when J1=regulated position.
6
Figure 2: MJ-2
COMPANY CONFIDENTIAL
Copyright © 2003 Nokia. All Rights Reserved.
NHL-10
Service Tools
ISSUE 2 01/2004