Kt520 Download - LG KT520 Service Manual

5. DOWNLOAD

5.3 KT520 Download

5.3.1 USB Driver Install
A. If you use LGDP2 Tool firstly, Error will happen because of USB Driver uninstalled.
You have to do LGDP2 USB Driver Installation only at the first time of installation
1 step : go to the directory = ../LGDP2_VXX/wrapper_USBDriver
2 step : click "erasedrv.exe"
3 setp : click "installme.bat"
Although install is to do, not install USB driver. And then, can be operate plug & play.
If you see "Found New Hardware" when phone is connect after complete install, and then follow as
indicated blew.
when connect the phone, must be check that phone should be turn off and battery should be full-
gauge (At lease three(75%) more).
B. Push "the Next Button" in Found New Hardware Wizard
LGE Internal Use Only Copyright © 2008 LG Electronics. Inc. All right reserved.
- 168 -
Only for training and service purposes