Fault Finding Charts For Transmitter; Amps; Fig 37 Rf Test; Fig 38 Rf Controls - Nokia RH-13 Series Troubleshooting Manual

CCS Technical Documentation

Fault finding charts for transmitter

AMPS

Start Phoenix-software and set phone to the Analog mode. Set channel 383 and Power
level 2. Connect RF-cable to Ext RF connector and connect cable to Spectrum analyzer
input and measure RF level. Please notice insertion loss of the cable and attenuations.
Issue 1 11/02
Figure 37: RF Test.
Figure 38: RF controls.
ãNokia Corporation
RH-13
Troubleshooting
Page 55