Gsm1900 (Pcs) Transmitter; General Instructions For Gsm1900 Tx Troubleshooting - Nokia RH-47 Series Rf Description And Troubleshooting

Nokia Customer Care

GSM1900 (PCS) transmitter

General instructions for GSM1900 TX troubleshooting

Start the investigations as described in chapter General instructions for TX troubleshoot-
ing "General instructions for TX troubleshooting".
1 Set operating mode to local mode:
Select
Wait until the RF Controls window pops up.
2 In the RF Controls window:
Select
The setup should now look like this:
Now the measurement equipment should detect the following output signal of the
phone:
= +20 ± 1dBm @ 1880MHz
P
out
If this is not the case, then go to the next chapter for troubleshooting.
Issue 1 05/04
Company Confidential
7 - RF Description and Troubleshooting
Maintenance Testing
Band
Active unit
Operation mode
RX/TX Channel
TX Power Level
TX Data Type
Copyright © 2004 Nokia Corporation
Company Confidential
RH-47
RF Controls
GSM 1900
TX
Burst
661
5
Random
Page 31