General tools
The table below gives a short overview of service tools that can be used for testing error analysis and repair of
product RM-384.
Page 2-6
RJ-230
RJ-230 is a jig to support component level exchange with soldering
machines for the engine module.
PK-83
PK-83 is a hardware protection key with a USB interface to enable the use
of the service software when connected to the USB port of the PC or
Notebook. It is not possible to use the service software without PK-83
Table 11 General tools table
Company Confidential
Copyright © 2009 Nokia. All rights reserved.
Service Tools and Service Concept
Soldering
AMS SW Protection Key (USB)
RM-384
Issue1