Nokia 8208 Service Manual page 112

Setup for Bluetooth Troubleshooting
Use the following steps to configure FTM mode for Bluetooth troubleshooting.
1. Connect Bluetooth connector to a Bluetooth call box. (EX: Anritsu 8852B)
2. Put PWB on the module jig, connect data service cable between PC and Module Jig and connect a power
supply
3. Open RF Toolkit in L3 program and select Baseband function
4. Select "KeyPad Simulator"
5. Press keyPad " *#4183# " to enter Bluetooth test mode.
Page 4-24
Figure 48 Display of entering the Bluetooth test mode
Company Confidential
Copyright © 2008 Nokia. All rights reserved.
RM-384
RF Troubleshooting
Issue1