Cleaning Milk System" Programme - Melitta CI Touch Operating Instructions Manual

9.5 "Cleaning milk system"
programme
This programme is used to clean the milk
system with the aid of a milk system clean-
ing agent.
To maintain hygiene and avoid damage
to the appliance, we recommend carrying
out the cleaning programme once a week.
The cleaning programme takes approx-
imately 3 minutes and should not be
interrupted.
ATTENTION
The use of unsuitable milk system clean-
ing agents can damage the appliance.
Only use Melitta® PERFECT CLEAN milk
ƒ
system cleaning agent for fully auto-
matic coffee makers.
Observe the processing instructions
ƒ
on the packaging of the milk system
cleaning agent.
Requirement: The appliance is ready for
operation.
1. Place a container (0.7 l) beneath the
coffee spout (e.g. the coffee grounds
container).
2. Press the "rotary switch" for 2 seconds.
» The menu appears on the display.
3. Navigate to the Care > Cleaning milk
system menu.
4. Select Start and confirm your selection.
5. Follow the further instructions on the
display up to the end of the Cleaning
milk system programme.
Cleaning the milk unit
In addition, we recommend cleaning the
milk unit, the milk hose and the milk con-
tainer regularly.
Information
ū The plastic milk container, without lid
and riser pipe, is dishwasher-safe.
Mel_009_CI_Touch_20_de--kr_druck.indb 47
Care and maintenance
8
Fig. 16: Access to the milk unit
35
36
Fig. 17: Removing the milk unit
1. Pull the milk hose off the appliance.
2. Open the door of the spout (8).
3. Pull the milk unit (36) off downwards.
4. Clean the individual parts with warm
water. Use a soft, damp cloth and nor-
mal washing up liquid for this.
Installation is carried out as described in
reverse order.
Information
Make sure that the milk unit is pushed
upwards to the end stop.
47
14.09.2018 13:51:40