Metabo HG 18 LTX 500 Original Instructions Manual page 10

en ENGLISH
B Chargers: ASC 55, ASC 145, etc.
If you need any accessories, check with your
dealer.
For the dealer to select the correct accessory, he
needs to know the exact model designation of your
power tool.
For the complete range of accessories, see
www.metabo.com or the main catalogue.
12. Repairs
Repairs to electrical tools must ONLY be
carried out by qualified electricians!
Contact your local Metabo representative if you
have Metabo power tools requiring repairs. For
addresses see www.metabo.com.
You can download a list of spare parts from
www.metabo.com.
13. Environmental Protection
Observe national regulations on environmentally
compatible disposal and on the recycling of disused
machines, packaging and accessories.
Only for EU countries: never dispose of
power tools in your household waste!
According to European Directive 2012/19/EU
on Waste from Electric and Electronic Equipment
and implementation in national law, used power
tools must be collected separately and recycled in
an environmentally-friendly manner.
14. Technical Specifications
HG 18 LTX 500
Air temperature:
Air volume:
Thermal protection: Thermal fuse
Weight
Sound pressure level:< 70 dB (A)
Vibration:
Changes due to technological progress reserved.
Values measured as per EN 62841.
Permitted ambient temperature during operation:
-20 °C (-4°F) to 50 °C (120°F) (limited performance
with temperatures below 0 °C (32°F)). Permitted
ambient temperature for storage: 0 °C (32°F) to
30 °C (86°F).
Direct current
The technical specifications quoted are subject to
tolerances (in compliance with relevant valid
standards).
10
Stage 1:......................300 °C
Stage 2:......................500 °C
Stage 1:.................. 200 l/min
Stage 2:.................. 160 l/min
686 g (24.2 oz)
2
< 2.5 m/s