Storage Enclosure Modules; Figure 1 Storage Enclosure With Rails - Seagate Exos CORVAULT Hardware Installation And Maintenance Manual

7
Item Description
1 Main bay cover front latch
2 Main bay front cover
3 Auxiliary bay cover
4 Fixed controller cover
5 Fixed midplane cover
6 Cable management arm (CMA)

Figure 1 Storage enclosure with rails

Storage enclosure modules

The storage enclosure contains a number of field-replaceable units (FRUs) that are hot-swappable, meaning you can
perform in-service maintenance without powering down the storage enclosure. Modules or components that are cold-
swap and require trained service personnel to replace them are not identified.
CAUTION If you partially populate the storage enclosure with disk drives, you must populate from front to back,
filling an entire lateral bay before populating the next bay.
1 2
8
9
4
3
10
Item Description
7 Auxiliary bay cover latch
8 Front panel
9 Pull handle
10 Right rail assembly with CMA B bracket
11
Main bay rear cover
12 Main bay cover rear latch
5
6
11 12
Chapter 2 System overview
11