Specifications - Sony HDPS-M10 Operating Instructions Manual

Hdd photo storage
Hide thumbs Also See for HDPS-M10:
Table of Contents

Advertisement

6
Remove the internal battery.
Notes
• The interior of the unit may become hot during
operation. Before removing the internal battery,
make sure that the unit has cooled down.
• Take care that no foreign object enters the unit
while the internal battery is removed.
• Do not reinstall the internal battery into the unit
once removed.
• When disposing of the internal battery, make
sure that you conform to your local regulations.

Specifications

HDPS-M10
Storage capacity
40 GB
(Formatted with FAT32. 1 GB amounts to
1,000,000,000 bytes.)
Media slots
"Memory Stick" slot × 1
CompactFlash slot × 1
Supported media
See page 6.
Interface
USB 2.0 (Hi-Speed/Full-Speed)*
* If the connected computer does not support
USB 2.0, transfer speed will be according to
Full-speed USB (12 Mbps).
Connector
USB (mini-B) × 1
Power supply
Lithium-ion rechargeable battery
(internal)
100 - 240 V AC, 50/60 Hz
E N
O P
Power consumption
7.5 W maximum
Ambient conditions
Operating temperature: 5 °C to 40 °C
(40 °F to 104 °F) (temperature gradient
less than 10 °C/hour (50 °F/hour))
Operating humidity: 20% to 80%
(non-condensing)
Dimensions
Approx. 135 × 30 × 92 mm
3
× 1
(5
/
8
(W × H × D)
Mass
Approx. 300 g (10.6 oz.)
Supplied accessories
AC power adapter
(SONY, Model HDAC-M1) (1)
Carrying case (1)
Hand strap (1)
Operating Instructions (this document)
PhotoDiary software (on the hard disk)
Power cord (1)
Read Me First (1)
USB cable (1)
Warranty card (1)
Design and specifications are subject to
change without notice.
3
× 3
5
/
/
in.)
16
8
47

Advertisement

Table of Contents
loading

Table of Contents