Using The Unit With The Ac Power Adapter; Power Save Function; Using The Unit Abroad - Sony HDPS-M10 Operating Instructions Manual

Using the unit with the AC power adapter

You can use the unit without worrying about the remaining charge of the
internal battery simply by connecting the AC power adapter. Connect the AC
power adapter to the unit as outlined in "Charging the battery"(page 14).

Power save function

When the unit is used stand-alone, it turns off automatically after remaining
idle for 5 minutes, whether operating on internal power or through the AC
power adapter. Simply restart the unit to resume operation.

Using the unit abroad

Power sources
You can use the unit in any country or area with the supplied AC adapter
within 100 V to 240 V AC, 50/60 Hz. Use a commercially available AC plug
adapter [a], if necessary, depending on the design of the wall outlet (wall
socket) [b].
HDAC-M1
• Do not use an electronic transformer (travel converter), as this may cause a
malfunction.
16
[a] [b]