Toro 127-6879 Quick Start Manual page 2

2
Removing the Existing Blades
No Parts Required
Procedure
1. Use a block of wood to hold each blade steady, and turn
the blade bolt counterclockwise as shown in Figure 2.
2. Remove each blade as shown in Figure 3.
1
1. Spindle (2)
2. Blade driver (2)
Figure 2
2
G016530
4
Figure 3
3. Blade (2)
4. Blade bolt (2)
3
Installing the Baffle
Parts needed for this procedure:
1 Baffle
Procedure
1. Remove the 4 bolts and 4 nuts in the front of the
machine housing (Figure 4).
1. Bolt (4)
2. Baffle
2. Install the baffle with the 4 bolts and 4 nuts that you
removed in step 1 (Figure 4).
3
2
Figure 4
3. Nut (4)