Sony Handycam HDR-TD20V Operating Manual page 26

To turn off the beep sound
 [Setup]  [
Select
Notes
The recording date, time and condition, and coordinates (HDR-TD20V) are recorded automatically on

the recording media. They are not displayed during recording. However, you can check them as [Data
Code] during playback. To display them, select
Code]  [Date/Time].
Once the clock is set, the clock time is automatically adjusted with [Auto Clock ADJ ] and [Auto Area

ADJ] set to [On]. The clock may not be adjusted to the correct time automatically, depending on the
country/region selected for your camcorder. In this case, set [Auto Clock ADJ ] and [Auto Area ADJ] to
[Off] (HDR-TD20V).

[Power On By LCD] (p. 75)

To set the date and time again: [Date & Time Setting] (p. 75)

US

General Settings]  [
 [Setup]  [
]  [Off].
Beep
Playback Settings]  [Data