Kodak Instamatic M Series Repairing page 7

T IP: Before getting too far into the projector, check the
plastic guide—the guide is black plastic in Fig. D7 and
white plastic in Fig. D9. If the guide is cracked or broken,
there's no use proceeding with the disassembly—you can't
get the guide as a replacement part. If the projector belongs
to a customer, return it as unrepairable. If you own the
projector, you can use it for parts or as a practice mechanism.
Or perhaps you can locate an unrepairable projector you can
use for parts.
SWITCH
FIG. D6 Unplug the lead of
the power cord from the
switch.
WIRE TIE
FIG. D7 Bottom cover lifted aside.
Compliments of:
www.KodakParts.com
PORT IDENTIFICATION
FIG. D5 Here
the shutter
gear has
completely
broken away.
MOTOR
FIG. D4 This projector has a broken shutter
gear—a new shutter is needed.
SWITCH
5/KODAK M-SERIES PROJECTORS
SHUTTER GEAR
HUB FOR SHUTTER GEAR
GUIDE