Figure 3-17. Test Ip Address Menu - ADTRAN Quad T1 IMA Installation And Maintenance Practice

30. Add the IP address to the network routers/servers.
31. Press until the System Management menu displays.
E
SC
32. From the System Management menu, select
The Test IP Address menu is displayed (see
TID: HSVL00001
Unacknowledged Alarms: None
1. IP Address
2. Ping Timeout
3. Number of Pings
33. From the Test IP Address menu, select
The IP Address field is highlighted.
34. Enter the IP address of the default gateway to Ping in decimal dot format, and press
35. From the IP Address menu, select
36. Confirm that the Traffic Descriptor default values match the local practices and modify
accordingly.
37. Add the Service Profiles to the Total Access 1248 for the approved service.
38. Pre-provision the system using the information provided in the appropriate work order.
39. Place the DSL ports In Service, as needed.
61179641AL1-5C
Total Access 1248
Test IP Address
Not configured
1 secs
4 pings
Selection :
'?' - System Help Screen

Figure 3-17. Test IP Address Menu

IP Address
, and press
Start Ping
, and press
Test IP Address
Figure 3-17).
4. Start Ping
5. Start Traceroute
, and press
E
NTER
to initiate the Ping.
E
NTER
Quick Turn-up Steps
.
E
NTER
.
E
NTER
.
3-23